1. Forum
  2. fsxNet
  3. Talisman/Magicka Support

  • ANSI question

    From Blue White@21:4/134 to All on Wed Dec 20 08:39:18 2023
    Good morning,
    I have an ANSI screen or two where I would like the whole screen to
    display without a more prompt in the middle. I thought the at command to
    make this happen was (at)POFF(at) at the top of the ANSI file. However, Talisman actually displays the (at)POFF(at) to the caller and still stops
    for a more about halfway through the screen.

    Is there an at command that will stop that, or something else I need to
    try?

    Thanks!


    --- Talisman v0.51-dev (Linux/armv7l)
    * Origin: possumso.fsxnet.nz * telnet:2123/ssh:2122/ftelnet:80 (21:4/134)
  • From apam@21:1/182 to Blue White on Thu Dec 21 08:18:14 2023
    Good morning,
    I have an ANSI screen or two where I would like the whole screen to
    display without a more prompt in the middle. I thought the at command to make this happen was (at)POFF(at) at the top of the ANSI file. However, Talisman actually displays the (at)POFF(at) to the caller and still stops for a more about halfway through the screen.

    https://talismanbbs.com/docs/gfilemacros/

    the macro is "@NOPAUSE@"

    Andrew

    --- Noddy git-ffed849
    * Origin: Smuggler's Cove - scove.talismanbbs.com:2323 (21:1/182)
  • From Blue White@21:4/134 to apam on Thu Dec 21 08:41:12 2023
    https://talismanbbs.com/docs/gfilemacros/

    the macro is "@NOPAUSE@"

    Thanks. I looked but not hard enough! ;)



    --- Talisman v0.51-dev (Linux/armv7l)
    * Origin: possumso.fsxnet.nz * telnet:2123/ssh:2122/ftelnet:80 (21:4/134)