Hi

Been doing some bug fixing where ASCII mode is concerned (or at least
ANSI is not detected)

There was some issues where ANSI was still being sent. That's fixed. Also
I've added the option to force ansi if it's not detected.

Basically when you connect it and it doesn't detect it, it will prompt if
you want to use it anyway.

The reason for this? I've been playing with my CP/M Z180 computer and
Kermit doesn't detect ansi. (Although ansi works, except for high ascii).

This message was written using kermit on a SC126 Z180 With a hard disk
drive ! (I made a IDE HDD controller today for it :D)

Andrew

--
|03Andrew Pamment |08(|11apam|08)
|13Happy|10Land |14v2.0|08!


--- Talisman v0.13-dev (Linux/x86_64)
* Origin: HappyLand v2.0 - telnet://happylandbbs.com:11892/ (21:1/182)

apam wrote to All <=-

This message was written using kermit on a SC126 Z180 With a hard disk drive ! (I made a IDE HDD controller today for it :D)

I fired up one of my old C64's, it worked I forget how to use it
and when I rememeberd ran out of patience loading a program. ;)

Shawn

... The wrong way always seems to be the more reasonable way.

--- EzyBlueWave V3.00 01FB001F
* Origin: Tiny's BBS - telnet://tinysbbs.com:3023 (21:1/130)

On 22 Mar 2021 at 03:58p, apam pondered and said...

The reason for this? I've been playing with my CP/M Z180 computer and Kermit doesn't detect ansi. (Although ansi works, except for high ascii).

This message was written using kermit on a SC126 Z180 With a hard disk drive ! (I made a IDE HDD controller today for it :D)

I saw some pictures of this project - nice job :)

--- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
* Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)

I saw some pictures of this project - nice job :)

Thanks :)

--
|03Andrew Pamment |08(|11apam|08)
|13Happy|10Land |14v2.0|08!


--- Talisman v0.13-dev (Linux/x86_64)
* Origin: HappyLand v2.0 - telnet://happylandbbs.com:11892/ (21:1/182)